Specifications
|
Apply AP-1200 EPDM Rinseable Primer to the entire surface at a rate of 300 – 400 square feet per gallon. Allow 10-15 minutes to activate before pressure washing with a minimum of 2000 PSI. |
|
|
The surface should be clean and dry before the installation of the Armour-Ply System. |
|
|
Apply one coat of AP-5100 Moisture Cure Urethane at a rate of 1.00 – 1.25 gallons per 100 square feet. Allow 2-6 hours to dry. |
|
|
Apply one coat of AP-5100W Moisture Cure Urethane at a rate of 1.00 – 1.25 gallons per 100 square feet. Allow 2-6 hours to dry. |