Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket

Our Top of the Line Silicone!

AP-5400

High Solids Silicone Roof Coating

Withstands Ponding Water with low VOC & Less Dirt Pickup Compared to Standard Silicone Roof Coatings

Description

Armour Proof AP-5400 High Solids Silicone Roof Coating is an exciting, new high yield, low VOC one-part silicone elastomeric roof coating! It was specifically designed as a protective coating over a variety of roofing substrates. Once cured, this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. AP-5400 High Solids Silicone Roof Coating, when compared mil for mil, provides greater UV protection than similar silicone coatings and offers increased resistance to moisture penetration. AP-5400 provides excellent long term protection through exceptional weather-ability properties.

High Solids, Low Volatile Organic Compounds (VOC) and Greater UV Protection & Increased Resistance to Moisture Penetration.

Where to Use AP-5400 High Solids Silicone Roof Coating
Metal
BUR
Primed Wood
Concrete
Single-Ply
Spray Foam

Quick Application Guide

Min Dry Mil Thickness

20 Mils

Apply by Roller, Brush or Airless Spray Equip.

Average Coverage Rate

1½ GAL

Per Square (Per Coat)

Recommended Tip Size

.031″

At a Minimum PSI of 3000

Coverage & Drying Time

Apply AP-5400 at the rate of 1.5 gallons per square. Minimum dry mil thickness shall be above 20 mils. Two passes of silicone and a primer coat may be required for some applications and warranty programs. PRODUCT APPLICATION SHOULD BE SUSPENDED IMMEDIATELY AND OUR TECHNICAL SERVICE PERSONNEL CONTACTED IF THE RESULTS BEING OBTAINED ARE LESS THAN DESIRABLE. Refer to the Armour Proof Coatings Specification for detailed instructions.

Application

AP-5400 High Solids Silicone Roof Coating may be applied by medium nap rollers, soft brushes or high pressure airless spray equipment. Apply AP-5400 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50-90°F. Higher temperatures will shorten the cure and working times for proper application of granules before the material has skinned. Lower temperatures will lengthen the skinover, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development. For best results, relative humidity should be above 20%. Lower humidity will slow the cure time significantly.

Preparation of Substrate

Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.

Limitations and Precautions

AVOID CONTAMINATION IN SEALED CONTAINERS. STORE AWAY FROM HEAT, SOURCES OF IGNITION AND INCOMPATIBLES. USE ONLY IN WELL VENTILATED AREAS. Do not inhale vapor or mist. Do not get on skin, in eyes or on clothing. Refer to SDS for more information.

Application Information

Minimum Pump Pressure
Tip Size
Hose
3000 psi
.027"-.039" (.031" recommended)
Use ⅜" up to 100'. Use ½"+ for 100'–200'

Use as Part of a System with these products:

AP-2400 Silicone Mastic 2024 Rebrand in 2 Gallon Plastic Bucket

AP-2400

Silicone Mastic

AP-5100 Moisture Cure Polyurethane Roof Coating 2024 Rebrand in 5 Gallon Pail

AP-5100

Moisture Cure Polyurethane

AP-5200 Silicone Roof Coating 2024 Rebrand in 5 Gallon Pail

AP-5200

Silicone Roof Coating

Product Information

Sizes Available

5 Gallon Capacity Bucket
55 Gallon Capacity Drum
275 Gallon Capacity Tote

Tools Needed

Brush Tool Graphic
Roller Tool Graphic
Spray Tool Graphic

DATA SHEETS

Available From These Distributors

Click a logo to find a location close to you.

ABC Supply Co Distributor Logo
Beacon Roofing Supply Distributor Logo
J & L Building Materials Inc. Distributor Logo
New Castle Building Products Distributor Logo
Image of SRS Distribution's Logo
Universal Supply Co Distributor Logo
Image of Armour Proof Coatings Approved Applicator Badge

Grow Your Roofing Business

Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!

Have Additional Questions About AP-5400 High Solids Silicone Roof Coating?
Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for AP-5400 High Solids Silicone Roof Coating

Which Best Describes You?