Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket

Restore Roofs with Positive Slope

AP-5200

Silicone Roof Coating

Energy Efficient, Waterproof & Flexible

Description

Armour Proof AP-5200 Silicone Roof Coating is a one-part silicone elastomeric coating specifically designed for use in roofing applications. Once cured, this liquid applied silicone coating provides a durable, seamless, flexible, waterproof membrane that resists lateral movement, shear and will allow for normal expansion and contraction. Armour Proof AP-5200 Silicone Roof Coating provides greater UV protection than similar coatings and offers increased resistance to moisture penetration. AP-5200 provides excellent long term protection through exceptional weatherability properties. AP-5200 was specifically developed as a protective coating for single ply membranes, granulated modified bitumen, metal and sprayed-in-place polyurethane foam roofing. AP-5200 is also used as a top coat over Armour Proof AP-5100 Moisture Cure Polyurethane in membrane restorations. With excellent adhesion to all substrates and exceptional durability, AP-5200 is proven to provide excellent solar reflectivity, UV protection and long term waterproofing performance.

A Cool Roof Rated Roof Coating, that Offers a Durable Layer of Seamless, Flexible Protection

Where to Use AP-5200 Silicone Roof Coating
Asphalt
Metal
Single-Ply

Quick Application Guide

Min Mil Thickness

18 DFT

Apply by Roller, Brush or Airless Spray Equip.

Average Coverage Rate

1–1¼ GAL

Per Square (Per Coat)

Recommended Tip Size

.031

At a Required PSI of
2000 – 3000

Coverage & Drying Time

Apply AP-5200 at a rate of 1.5 gallons per 100 square feet per gallon per coat, according to the substrate and condition. A minimum of 25 mils DFT is recommended. Armour Proof AP-5100 Moisture Cure Polyurethane may be applied as a Primer/Base Coat at a rate of 1.25 gallons per 100 square feet, and then coated with the AP-5200 Silicone. Skin-Over in 30 minutes, Tack Free in 2 hours, Dry to touch in 6 hours

Application

AP-5200 may be applied by medium nap rollers, soft brushes or conventional airless spray equipment. Apply AP-5200 only to clean, dry, sound surfaces free of loose particles or other foreign matter. For best results, ambient temperature should be between 50-80°F. Higher temperatures will shorten the cure time and working time. Lower temperatures will lengthen the skin over, tack free and ultimate cure time. Sudden temperature declines may also result in dew formation on surfaces, which can prevent adhesion development. For best results, relative humidity should be above 20%. Lower humidity will slow the cure time significantly.

Preparation of Substrate

Surface must be pressure washed clean, free of all loose particles, dirt debris and other contaminants that could inhibit adhesion. An Armour Proof primer may be required for the particular substrate. Refer to the Armour Proof Coatings Specification for detailed instructions on how to prepare the specific substrate.

Limitations and Precautions

AVOID CONTAMINATION IN SEALED CONTAINERS. STORE AWAY FROM HEAT, SOURCES OF IGNITION AND INCOMPATIBLES. USE ONLY IN WELL VENTILATED AREAS. Do not inhale vapor or mist. Do not get on skin, in eyes or on clothing.

Application Information

Required PSI
Spray Rate Gal/Min
Coverage Rate Gal/100 Sq.Ft.
Tip Size
3500
3–4
.031" – .039"

Make Repairs with:

AP-2400 Silicone Mastic 2024 Rebrand in 2 Gallon Plastic Bucket

AP-2400

Silicone Mastic

Product Information

Sizes Available

5 Gallon Capacity Pail
55 Gallon Capacity Drum
275 Gallon Capacity Tote

Tools Needed

Brush Tool Graphic
Roller Tool Graphic
Spray Tool Graphic

DATA SHEETS

Available From These Distributors

Click a logo to find a location close to you.

ABC Supply Co Distributor Logo
Beacon Roofing Supply Distributor Logo
J & L Building Materials Inc. Distributor Logo
New Castle Building Products Distributor Logo
Image of SRS Distribution's Logo
Universal Supply Co Distributor Logo
Image of Armour Proof Coatings Approved Applicator Badge

Grow Your Roofing Business

Become an approved applicator of our Armour Proof Coatings systems and gain the perks of being a trusted and approved contractor. Benefits include project referrals, marketing assistance, product trainings & more!

Have Additional Questions About AP-5200 Silicone Roof Coating?
Del-Val 120 Fibered Emulsion Coating in 5 Gallon Bucket
Looking for information on Warranted Roof Coating Systems?
Have a product specialist reach out to answer any questions you have.

Please fill out the below form completely and we’ll be happy to get in touch with you!

New Inquiry for AP-5200 Silicone Roof Coating

Which Best Describes You?